In order to reach the desired performance of Ultra Racing products, we constantly monitor the quality of our products not only during the production stage, but also conduct strict performance testing afterwards.

During the development phase of Ultra Racing bars, we ensure the products are in accordance to our design and development philosophy. We conduct real on-road performance test as well as on-track testing. In order to obtain data, we also invented three testing jigs, namely Bending Test Jig, Torsion Test and Flex Test Jig.hese jigs are used to test the performance of our products ona continuous basis.

The strut bar is bolted to the jig to simulate the actual situation on the vehicle chassis. For torsion test jig, torque is applied to one side of the bar, and the amount of twist is recorded. Torque used was calculated and fixed at 6.6kg/m.

For compression test jig, forces are applied along both sides of the bar. Maximum compression force is recorded to study the structure of various kind of designs that the bar can withstand under different driving conditions including impact simulating an accident. We use a hydraulic pump to compress at set pressures and record the results

For flex test jig, torques are applied on the ends of the bars to simulate the performance of the bar under chassis flex conditions. Torque used for the experiment is fixed at 8kg/m.